By showbizshane - Monday, May 5, 2014 3:49:47 PM
A quick question for everyone to answer.
It appears that 'Local Jump buttons' are being picked up locally on the PC that Myriad is installed on and not from a network location where my Myriad files are located for Audio and Directory. Is this correct or do I have a wrong configuration as I would assume that this should be global.
1/ Create a local jump button on 'Myriad1' PC
2 / Log on to 'Myriad2' PC and logon with above account that was used and the 'local jump' buttons are not the same, only what has been configured locally on the PC is shown.
Many thanks
Shane Carson
|
By Peter Jarrett - Tuesday, May 6, 2014 12:22:28 PM
Hi All,
The Local Jump buttons are just that - "local"  so they are only local to that specific computer. It's so that different workstations in different rooms might have different purposes - e.g. a Production Studio might likely want to commonly jump to different areas than, say, the on-air studio.
If you want to display different ones (e.g. shared ones) the across the top of the AudioWall, you can do this via Myriad Playout Settings>Audiowall Tab>Other Settings where there is a drop down list to choose what gets displayed there
|
|